SPEC POM VALVES Form
Print page to complete ordownload fillable PDF here
Salesperson:_______________________________________Date:____________________
Company ____________________________________Phone# _________________________
Customer ___________________________________Fax# ___________________________
S = System Piping Size & Material___________________________________________
P = Product Desired ________________________________________________________
E = Estimated Yearly Usage _______One Time Order Yes _ No _ Qty.____________
C = Cv Flow Factor or orifice size ______Cv _________ Orifice Diameter______
P =Liquid Pressure: Inlet Max __ Min __ Outlet (Back)___Vacuum ___ Set Pressure__
O = Operation Style: (2-way or 3-way, Normally Open/Closed, Direct Acting/Pilot, Air/Electric)______________________
M = Media and Concentration _______________________________ _____% Conc.
V = Volume of Flow _____GPM ____ LPM ____ SCFM ____Pressure Drop (delta P) acceptable to achieve flow _____________PSI Maximum Body Seal
A = Ambient Temperature _____ °F _____°C Maximum ______________
L = Liquid Temperature _____ °F _____°C Maximum ______________
V = Valve Body and Seal Material _____________Body ____________________Seal
E = Electrical Specifications Voltage _________A/C ___D/C ____
S = Special Notes, (i.e. cycle rate) and Budgetary Price Range
Use additional space below for other pertinent information (Dimensions, Performance Requirements. Tolerances, System Diagram, Duty Cycle, Cycle Life, etc.)